2010 Toyota Sienna Recall June 17, 2010 | Access Options Is Recalling Certain Trucks And Vans Built On Ford E150,

2010 Toyota Sienna Seats Recall | June 17, 2010

Access Options Is Recalling Certain Trucks And Vans Built On Ford E150, E350, Toyota Sienna, And Dodge Grand Caravan Chassis And Equipped With Vmi/ricon 6-way Power Seat Bases. The Six Way Power Seat Base May Have A Defective (cold) Weld On The Pivot Pin Which Is Welded To The Swivel Plate. The Weld Could Fail.

The Seat Occupant May Be Injured If The Seat Base Pin Were To Break.

Summary Of Corrective Actions Taken: The Swivel Plate Will Be Replaced Free Of Charge If Necessary. The Recall Began On June 8, 2010. Owners May Contact Access Option At 831-722-6804.

This Recall Only Pertains To Vehicles Altered By Access Options And Has No Relation To Any Vehicles Manufactured By Ford, Toyota, And Dodge.owners May Also Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty 1-800-424-9153), Or Go To http://www.safercar.gov .

This recall was issued on June 17, 2010 for 2010 Toyota Sienna, manufactured by ACCESS OPTIONS, INC, in response to Seats problems.

2010 Toyota Sienna Recall Feb 03, 2010 | Gulf States Toyota Is Recalling Certain Model Year 2005-2010 Vehicles For Failing

2010 Toyota Sienna Equipment,other,labels Recall | Feb 03, 2010

Gulf States Toyota Is Recalling Certain Model Year 2005-2010 Vehicles For Failing To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 110, “tire Selection And Rims.” These Vehicles Were Sold Between September 1, 2005 And June 2, 2008 Without The Requisite Load Carrying Capacity Modification Labels.

This Does Not Meet The Standard Requirements.

Summary Of Corrective Actions Taken: Dealers Will Mail To Consumers The Corrected Label Or The Customer Will Have The Option For Dealers To Install The Label Free Of Charge. Dealers Will Also Correct The Owner’s Manual. The Safety Recall Began On May 27, 2010. Owners May Contact Gulf States Toyota At 713-580-3300.

Owners May Also Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty 1-800-424-9153), Or Go To http://www.safercar.gov .

This recall was issued on Feb 03, 2010 for 2010 Toyota Sienna, manufactured by GULF STATES TOYOTA, INC., in response to Equipment,other,labels problems.

2010 Toyota Sienna Recall Dec 13, 2010 | Toyota Is Recalling Certain Model Year 2011 Sienna Vehicles. The

2010 Toyota Sienna Service Brakes, Hydraulic,pedals And Linkages Recall | Dec 13, 2010

Toyota Is Recalling Certain Model Year 2011 Sienna Vehicles. The Brake Stop Lamp Switch Is Mounted On A Small Bracket Welded On The Left Side Of The Service Brake Pedal Support Assembly. Due To Its Proximity To The Parking Brake Pedal, In Limited Circumstances The Stop Lamp Switch Bracket Could Be Damaged By The Operator’s Foot During Parking Brake Application.

This Could Result In Brake Drag With Associated Brake Noise, Vibration, And/or Illumination Of The Brake Warning Light. Braking Effectiveness Could Be Reduced Increasing The Risk Of A Crash.

Summary Of Corrective Actions Taken: Dealers Will Replace The Bracket Assembly Free Of Charge. Toyota Plans To Mail An Interim Owner Notification In The Middle Of January 2011, To Advise Owners Of The Recall. A Second Letter Will Be Mailed When Parts Are Available To Complete Repairs. Owners May Contact Toyota At 1-800-331-4331.

Toyota Safety Recall No. Aop.owners May Also Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty 1-800-424-9153), Or Go To http://www.safercar.gov .

This recall was issued on Dec 13, 2010 for 2010 Toyota Sienna, manufactured by TOYOTA MOTOR NORTH AMERICA, INC., in response to Service Brakes, Hydraulic,pedals And Linkages problems.

2010 Toyota Sienna Recall Apr 20, 2010 | Toyota Is Recalling Certain Model Year 1998 Through 2010 Sienna Passenger Vehicles

2010 Toyota Sienna Structure Recall | Apr 20, 2010

Toyota Is Recalling Certain Model Year 1998 Through 2010 Sienna Passenger Vehicles Manufactured Between August 7, 1997 And January 4, 2010, Currently Registered In Or Originally Sold In Connecticut, Delaware, Illinois, Indiana, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Washington District Of Columbia, Virginia, West Virginia, And Wisconsin. The Subject Vehicles Are Equipped With The Spare Tire Stowed Under The Vehicle. If The Vehicle Is Operated In The Cold Climate Regions Of The United States Where Road Salt Is Frequently Used, Water Splashed Backwards With High Concentrations Of Road Salt Can Reach The Spare Tire Carrier And Corrode The Spare Tire Carrier Assembly Cable.

The Cable May Break Due To Excessive Corrosion And The Spare Tire May Separate From The Vehicle, Possibly Resulting In A Vehicle Crash.

Summary Of Corrective Actions Taken: Toyota Will Notify Owners With An Interim Letter Initially Instructing Them To Bring Their Vehicle To Authorized Dealers To Inspect For Corrosion. A Second Notice Will Be Sent When The Permanent Remedy Is Available. For More Information, Please See Toyota’s Amended Recall Report Of July 19, 2010. The Safety Recall Is Expected To Begin On October 12, 2010. Owners May Contact Toyota At 1-800-331-4331.

Toyota Recall No. Aoe.owners May Also Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty 1-800-424-9153), Or Go To http://www.safercar.gov .

This recall was issued on Apr 20, 2010 for 2010 Toyota Sienna, manufactured by TOYOTA MOTOR NORTH AMERICA, INC., in response to Structure problems.

2010 Toyota Sienna Recall Feb 03, 2010 | Southeast Toyota Is Recalling Certain Model Year 2005-2011 Passenger Vehicles For Failing

2010 Toyota Sienna Equipment,other,labels Recall | Feb 03, 2010

Southeast Toyota Is Recalling Certain Model Year 2005-2011 Passenger Vehicles For Failing To Comply With The Requirements Of Federal Motor Vehicle Safety Standard No. 110, “tire Selection And Rims.” These Vehicles Were Sold Without The Requisite Load Carrying Capacity Modification Labels.

A Driver May Overload A Vehicle Which May Increase The Risk Of A Crash.

Summary Of Corrective Actions Taken: Dealers Will Mail To Consumers The Corrected Label Or The Customer Will Have The Option For Dealers To Install The Label Free Of Charge. The Safety Recall Began On May 27, 2010. Owners May Contact Southeast Toyota At 1-800-301-6859.

Owners May Also Contact The National Highway Traffic Safety Administration’s Vehicle Safety Hotline At 1-888-327-4236 (tty 1-800-424-9153), Or Go To http://www.safercar.gov .

This recall was issued on Feb 03, 2010 for 2010 Toyota Sienna, manufactured by SOUTHEAST TOYOTA DISTRIBUTORS, LLC, in response to Equipment,other,labels problems.