1999 Toyota Towing Hitch Kit Recall Apr 19, 1999 | Towing Hitch Kits And Aftermarket Trailer Towing Wire Harness Converters For Use

1999 Toyota Towing Hitch Kit Trailer Hitches Recall | Apr 19, 1999

Towing Hitch Kits And Aftermarket Trailer Towing Wire Harness Converters For Use On 1998-1999 Lexus Lx470, And Toyota Land Cruisers. Due To Inadequate Waterproofing Performance And Improper Installation Location Of The Converter, Which Is Mounted On The Exterior Of The Vehicle, An Electrical Short Circuit Could Occur If Water Enters The Converter Housing.

The Short Circuit Can Cause A Failure Of The Converter, And If A Trailer Is Being Towed At The Time, Can Also Cause Failure Of The Trailer Lights.

Summary Of Corrective Actions Taken: Dealers Will Replace The Converter.

Owner Notification Began May 17, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Toyota At 1-800-331-4331.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Apr 19, 1999 for 1999 Toyota Towing Hitch Kit, manufactured by TOYOTA MOTOR CO., LTD., in response to Trailer Hitches problems.

1999 Toyota Trailer Harness Recall Apr 19, 1999 | Towing Hitch Kits And Aftermarket Trailer Towing Wire Harness Converters For Use

1999 Toyota Trailer Harness Trailer Hitches Recall | Apr 19, 1999

Towing Hitch Kits And Aftermarket Trailer Towing Wire Harness Converters For Use On 1998-1999 Lexus Lx470, And Toyota Land Cruisers. Due To Inadequate Waterproofing Performance And Improper Installation Location Of The Converter, Which Is Mounted On The Exterior Of The Vehicle, An Electrical Short Circuit Could Occur If Water Enters The Converter Housing.

The Short Circuit Can Cause A Failure Of The Converter, And If A Trailer Is Being Towed At The Time, Can Also Cause Failure Of The Trailer Lights.

Summary Of Corrective Actions Taken: Dealers Will Replace The Converter.

Owner Notification Began May 17, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Toyota At 1-800-331-4331.also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Apr 19, 1999 for 1999 Toyota Trailer Harness, manufactured by TOYOTA MOTOR CO., LTD., in response to Trailer Hitches problems.

1999 Toyota Camry Recall Nov 01, 1999 | Vehicle Description: Passenger Vehicles. The Steering Wheel Set Nut

1999 Toyota Camry Steering,wheel And Handle Bar Recall | Nov 01, 1999

Vehicle Description: Passenger Vehicles. The Steering Wheel Set Nut May Not Have Been Sufficiently Tightened Causing Steering Vibration And Looseness.

This Can Result In A Loss Of Vehicle Control.

Summary Of Corrective Actions Taken: Dealers Will Tighten The Steering Wheel Set Nut.

Toyota Recall Nos. X06 And Xl7.owner Notification Began November 30, 1999.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Toyota At 1-800-331-4331 Or Lexus At 1-800-255-3987. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Nov 01, 1999 for 1999 Toyota Camry, manufactured by TOYOTA MOTOR CO., LTD., in response to Steering,wheel And Handle Bar problems.

2000 Toyota Tundra Recall Jan 18, 2000 | Vehicle Description: Light Duty Trucks. The Tail Light

2000 Toyota Tundra Exterior Lighting,tail Lights Recall | Jan 18, 2000

Vehicle Description: Light Duty Trucks. The Tail Light Socket May Have Been Improperly Molded, Resulting In The Locking Tab Having Insufficient Force To Retain The Bulb.

If The Bulb Falls Out Of The Socket, The Brake Or Tail Lamp Function Cannot Occur.

Summary Of Corrective Actions Taken: Dealers Will Replace The Tail Lamp Sockets.

Toyota Recall No. Ssc Y01.owner Notification Began February 25, 2000.owners Who Take Their Vehicles To An Authorized Dealer On An Agreed Upon Service Date And Do Not Receive The Free Remedy Within A Reasonable Time Should Contact Toyota At 1-800-331-4331. Also Contact The National Highway Traffic Safety Administration’s Auto Safety Hotline At 1-888-dash-2-dot (1-888-327-4236).

This recall was issued on Jan 18, 2000 for 2000 Toyota Tundra, manufactured by TOYOTA MOTOR CO., LTD., in response to Exterior Lighting,tail Lights problems.

1980 Toyota Celica Recall Apr 11, 1980 | Due To A Faulty Press Die Used In Manufacturing Alternator Pulleys,

1980 Toyota Celica Electrical System,alternator/generator/regulator Recall | Apr 11, 1980

Due To A Faulty Press Die Used In Manufacturing Alternator Pulleys, Pulleys Installed On Certain Vehicles May Crack And Break During Vehicle Operation. The Battery Would Then Be Constantly Drained Without Recharging.

Summary Of Corrective Actions Taken: Dealer Will Replace The Engine Alternator Pulleys On The Involved Vehicles Without Charge To Owners.

Vehicle Description: Passenger Vehicles Equipped With 2or And 3tc Engines.system: Electrical; Alternator Pulley.consequences Of Defect: Vehicle Would Eventually Be Rendered Inoperable Bydraining Of The Battery And, In The Presence Of Traffic, An Accident Coouldresult. Also, Broken Pulley Parts May Scatter And Cause Personal Injury At Thetime Of Failure.

This recall was issued on Apr 11, 1980 for 1980 Toyota Celica, manufactured by TOYOTA MOTOR CO., LTD., in response to Electrical System,alternator/generator/regulator problems.

1980 Toyota Corolla Recall Mar 18, 1980 | The Lock Nut May Not Have Been Tightened Enough On The Steering

1980 Toyota Corolla Steering,gear Box (other Than Rack And Pinion) Recall | Mar 18, 1980

The Lock Nut May Not Have Been Tightened Enough On The Steering Gear Box Worm Gear Bearing And Adjuster. Consequently, The Worm Gear Adjuster May Become Loose Due To Excessive Pressure From Hard Repeated Steering.

Summary Of Corrective Actions Taken: Dealer Will Inspect The Steering Gear Box On The Involved Vehicles And, If Necessary, Secure The Steering Gear Box Worm Gear Bearing And Adjuster To Prevent Steering Instability.

Vehicle Description: Passenger Vehicles.system: Steering; Steering Gear Box Lock Nut.consequences Of Defect: This Condition Could Result In Free Play Of Thesteering Gear, Possible Loss Of Steering Control And An Accident.

This recall was issued on Mar 18, 1980 for 1980 Toyota Corolla, manufactured by TOYOTA MOTOR CO., LTD., in response to Steering,gear Box (other Than Rack And Pinion) problems.

1980 Toyota Corolla Recall Apr 11, 1980 | Due To A Faulty Press Die Used In Manufacturing Alternator Pulleys,

1980 Toyota Corolla Electrical System,alternator/generator/regulator Recall | Apr 11, 1980

Due To A Faulty Press Die Used In Manufacturing Alternator Pulleys, Pulleys Installed On Certain Vehicles May Crack And Break During Vehicle Operation. The Battery Would Then Be Constantly Drained Without Recharging.

Summary Of Corrective Actions Taken: Dealer Will Replace The Engine Alternator Pulleys On The Involved Vehicles Without Charge To Owners.

Vehicle Description: Passenger Vehicles Equipped With 2or And 3tc Engines.system: Electrical; Alternator Pulley.consequences Of Defect: Vehicle Would Eventually Be Rendered Inoperable Bydraining Of The Battery And, In The Presence Of Traffic, An Accident Coouldresult. Also, Broken Pulley Parts May Scatter And Cause Personal Injury At Thetime Of Failure.

This recall was issued on Apr 11, 1980 for 1980 Toyota Corolla, manufactured by TOYOTA MOTOR CO., LTD., in response to Electrical System,alternator/generator/regulator problems.

1968 Toyota Corona Recall Oct 24, 1968 |

1968 Toyota Corona Fuel System, Gasoline,carburetor System Recall | Oct 24, 1968

Summary Of Corrective Actions Taken:

Possibility That Screws Within Carburetor Automatic-choke Mechanism Securing Thermostat Housing May Become Loose.in Very Rare Cases, Dropping Of Screws Within Housing May Interfere With Choke Mechanism, Preventing Throttle Lever From Returning To Idle Position And Making Vehicle Difficult To Stop.(correct By Inspecting Screws And Tightening And Caulking Where Necessary.)

This recall was issued on Oct 24, 1968 for 1968 Toyota Corona, manufactured by TOYOTA MOTOR CO., LTD., in response to Fuel System, Gasoline,carburetor System problems.

1980 Toyota Toyota Truck Recall Apr 11, 1980 | Due To A Faulty Press Die Used In Manufacturing Alternator Pulleys,

1980 Toyota Toyota Truck Electrical System,alternator/generator/regulator Recall | Apr 11, 1980

Due To A Faulty Press Die Used In Manufacturing Alternator Pulleys, Pulleys Installed On Certain Vehicles May Crack And Break During Vehicle Operation. The Battery Would Then Be Constantly Drained Without Recharging.

Summary Of Corrective Actions Taken: Dealer Will Replace The Engine Alternator Pulleys On The Involved Vehicles Without Charge To Owners.

Vehicle Description: Passenger Vehicles Equipped With 2or And 3tc Engines.system: Electrical; Alternator Pulley.consequences Of Defect: Vehicle Would Eventually Be Rendered Inoperable Bydraining Of The Battery And, In The Presence Of Traffic, An Accident Coouldresult. Also, Broken Pulley Parts May Scatter And Cause Personal Injury At Thetime Of Failure.

This recall was issued on Apr 11, 1980 for 1980 Toyota Toyota Truck, manufactured by TOYOTA MOTOR CO., LTD., in response to Electrical System,alternator/generator/regulator problems.

1980 Toyota Corona Recall Apr 11, 1980 | Due To A Faulty Press Die Used In Manufacturing Alternator Pulleys,

1980 Toyota Corona Electrical System,alternator/generator/regulator Recall | Apr 11, 1980

Due To A Faulty Press Die Used In Manufacturing Alternator Pulleys, Pulleys Installed On Certain Vehicles May Crack And Break During Vehicle Operation. The Battery Would Then Be Constantly Drained Without Recharging.

Summary Of Corrective Actions Taken: Dealer Will Replace The Engine Alternator Pulleys On The Involved Vehicles Without Charge To Owners.

Vehicle Description: Passenger Vehicles Equipped With 2or And 3tc Engines.system: Electrical; Alternator Pulley.consequences Of Defect: Vehicle Would Eventually Be Rendered Inoperable Bydraining Of The Battery And, In The Presence Of Traffic, An Accident Coouldresult. Also, Broken Pulley Parts May Scatter And Cause Personal Injury At Thetime Of Failure.

This recall was issued on Apr 11, 1980 for 1980 Toyota Corona, manufactured by TOYOTA MOTOR CO., LTD., in response to Electrical System,alternator/generator/regulator problems.